304 Stainless Steel Household Digital Display Constant Pressure Booster Pump Fully Automatic Tap Water Self-Priming Jet Pump

Product Description

 

Product Description

These series self priming jet pumps suitable to convey clean water and non-aggres-sive chemical fluids,even with liquid mixed with gas ,from well in continuous duty;they are also indicated to increase water pressure in centralized water systems ,for small irrigation systems ,for watering gardens ,for washing systems with water
Product Parameters

Product Name	CHL/CHM304 Stainless Steel Horizontal Pipeline Centrifugal Water Pump Hot Water Pump Multi-stage Booster Pump
Component Construction	Pump body : Stainless steel  Pump support : Aluminum Alloy Motor housing :Aluminum Alloy Impeller: Stainless steel / PPO plastic  Motor shaft :carbon steel (304ss if request) Mechanical seal : Ceramic / Graphite
Operating Condition	Liquid Temperature up to 60 ºC Ambient Temperature up to 40 ºC Total Suction lift up to 9 m
Motor	Single Phase 220V /50Hz ,110V /60Hz if request Insulation Class B Production :IP44 ,IP54 if request Cooling:External Ventilation With Thermal Protector Continuous Work S1
Performance range	Capacity: Q up to 32m³/h Head: H up tp 88m Temperature: T up to 110°C Speed: n2900rpm or 3500rpm Power: P up to 55kw*2
Application area	Cooling water system Aquiculture Domestic water supply General industrial services Washing Environment protection

Application Area
CHL type stainless steel horizontal single stage centrifugal pump is a multifunctional pump with a wide range of applications
The product can transport various media, including water or industrial liquids, suitable for non
The typical applications of the same temperature, flow rate, and pressure range mainly include the following aspects:
1.Water supply: water plant filtration, transportation, and zoned water supply, as well as main pipe pressurization;
2.Industrial pressurization: process water system, cleaning system;
3.Industrial liquid transportation: boiler water supply, condensation system, cooling and air conditioning system, machine tool support
4.Weak acid and alkali transportation;
5.Water treatment: steaming systems or separators, swimming pools, etc;
6.Farmland irrigation, medicine and hygiene, etc
Introduction
1. Impeller and wet parts are made of stainless steel.
2. It's with the merits of small size, light weight, compact structure, low noise, easy to install and used.
3. Horizontal multistage non-self-priming centrifugal pump, attached with long shaft electric motor.
4. Axial inlet and radial outlet.
5. CHL flow passage components stainless steel 304 or 316, CHLF is stainless steel 304 or 316 segmental type pump body,        CHLF(T) is segmental type pump body and discharge are made of cast iron.

Working conditions
CHL, CHLF and CHLF(T) type pump are mainly used in industrial field:
Air-conditioning system
Cooling system
Industrial cleaning
Water treatment (Water purification)
Aquiculture
Fertilizing / metering system
Environmental application
Other special applications

Product Show

Jet pumps are commonly used for pumping water and other fluids in various applications. They utilize the Venturi effect to create a vacuum which draws fluid from a source and propels it through a discharge pipe. Here's a breakdown of how they work:

Principle: Jet pumps work on the principle of fluid dynamics known as the Venturi effect. When a fluid flows through a constricted section of a pipe, its velocity increases and its pressure decreases according to Bernoulli's principle. This decrease in pressure creates a suction effect, which can be used to draw fluid into the pump.

Components:

Nozzle: This is the constricted section where the fluid accelerates, creating the low-pressure zone.
Throat: The section immediately downstream from the nozzle where the fluid velocity is highest.
Diffuser: This section gradually expands to slow down the fluid velocity and increase pressure before it exits the pump.
Operation:

The jet pump typically consists of a nozzle through which a high-pressure fluid (usually water) is forced at high velocity.
This high-velocity fluid creates a low-pressure zone at the suction end of the pump, causing fluid from a reservoir or source to be drawn into the pump.

The entrained fluid mixes with the high-velocity fluid, and together they are discharged at a higher pressure through the pump's outlet.
Applications:

Jet pumps are commonly used for domestic water supply from wells, especially in areas where the water table is deep.
They are also used in industrial settings for pumping various liquids and for creating high-pressure water streams for cleaning or cutting.
Jet pumps are known for their simplicity, reliability, and ability to operate without the need for moving parts or electricity in some cases (when powered by compressed air or other fluid). However, they may have lower efficiency compared to other pump types, especially in high-head applications.

 

Company Profile

FAQ

Q1: Are you a factory or a trading company?

A: We are manufacturer.

Q2: What are your payment terms?

A: 30% T/T in advance, balance should be paid after receiving BL copy or LC at sight.

Q3: Can you do OEM?

A: Yes,we can. Any OEM are welcome!

Q4: How about the MOQ?

 A: Usually, it is 50-100 PCS for each modelBut sample order is highly welcome.

Q5:How about the delivery time?

A: 15-30 days after receiving customersdeposit.

Q6: How long is your warranty?

A: 1 year.

Q7:What can we do in one-year warranty?

A: 1.Providing Spare parts; 2.Engineer is available to service