Product Description
NYP high viscosity rotor pump is a delivery pump for high viscosity media. It is suitable for the transportation industry of various fluids, especially for fluid transportation that handles large changes in viscosity and a wide range. It can be used for transportation in petroleum, chemical industry, paint, grease, medicine, dye and food industries. There are two types of materials: ordinary cast iron and stainless steel. The pump head, pump casing and sealing cavity can all be equipped with insulation jackets. Select the location where insulation is required based on actual needs. The jacket and the pump body are cast into one body, which has good thermal insulation effect and can avoid various problems caused by welding the jacket. When heating is required, various heating media such as hot steam and thermal oil can be passed into the jacket cavity for heat preservation. When cooling is required: the constant temperature of the pump body can be maintained through various coolants. Adjustable clearance: The pump can adjust the gear clearance according to the viscosity needs without disassembling the pump to meet the process requirements of the pump under different viscosities. The operation is simple and does not require disassembly of pump parts. The outer rotor drives the inner rotor to rotate in the same direction, resulting in less wear and long service life.
Product Parameters
| Product Name |
High Viscosity Sanitary Rotor Lobe Pump Sugar Syrup Fluid Transfer Pumps Positive Displacement Rotor Gear Pump |
| Description |
Designed according to 3A standard, widely used for transfer viscous media in the food-processing, cosmetics and industries. |
| Construction |
Horizontal Ace series, diffirent rotor shapes(single rotro,tri-lobe rotors and butterfly type rotors) |
| Material |
SS304/SS316 |
| Seal Material |
EPDM (Standard, approval) |
| Temperature type |
-10 to 180ºC |
| Max. Flow: |
43000Liter/h |
| Voltage |
220V,380V |
| Motor Power |
0.37KW~22KW |
| Connection |
Flange/Thread |
Applicable medium temperature: -10 ºC -200 ºC
Applicable medium viscosity: 1.0cSt -300000cSt
Advantages of NYP type high viscosity internal rotor pump :
(1) Smooth liquid conveying, no pulsation, low vibration, and low noise.
(2) Has strong self suction performance.
(3) Proper selection of component materials can transport various corrosive media
Structural Feature
1 The high viscosity pump mainly consists of inner and outer rotors, shafts, pump bodies, pump covers, brackets, seals, bearings, etc.
2. The liquid is transported smoothly, without pulsation, small vibration and low noise.
3. The rotation speed of the high viscosity pump has a linear functional relationship with the flow rate. The rotation speed can be appropriately changed to change the flow rate of the pump. High viscosity pumps are particularly suitable for transporting high viscosity media. The high viscosity pump shaft end adopts mechanical seal.
4. Prevent leakage to the greatest extent.
5.Suitable for outdoor installation, the fully enclosed magnetic coupling cavity can protect the outer magnet from contact with moisture or external substances. There are more than
6. standard sliding bearing materials to choose from: cast iron, copper, graphite, tungsten carbide.
7.The standard magnet material is NdFeB alloy. Optional samarium cobalt permanent magnets allow operating temperatures up to 250 degrees Celsius.
8. can be transported in both directions.
9.External heating jacket for front cover and magnetic coupling shield are standard optional parts.
10.True back pull design.
11 standard flange connection, only light pump head can be provided.
12. Has inner jacket protection.
13. There is a cooling circulation system inside the pump body, so no external cooling is required.
14. Dynamic axial balancing system minimizes axial load, reduces power consumption and extends service life. 15. The fully enclosed magnetic coupling cavity increases safety.
Product Show
Application field:
Daily chemical products: sulfonic acid, glycerol, sorbitol, sulfate, facial cleanser, facial cleanser, shampoo, dishwashing detergent, hand sanitizer, shower gel, cosmetics, skincare cream, toothpaste, soap, laundry detergent slurry, etc.
Fine chemical industry: dyes, pigments, various intermediates, various slurries, chemical additives, printing and dyeing additives, leather additives, silicone, silicone grease, silicone oil, adhesive, leather shoe oil, suspension, white latex, various colloids, etc
Petrochemical industry: heavy oil, crude oil, sludge, asphalt, grease, lubricating oil, various catalysts, polyols, isocyanates, various high viscosity materials, and slurries with high solid content.
Food: chocolate, condensed milk, yogurt, honey, jam, ice cream, concentrated fruit juice, edible oil, milk, syrup, meat syrup, jelly, pectin, seasoning, sucrose, alcohol, sesame sauce, chestnut sauce, soy protein, tomato juice, enzyme preparations, corn syrup, etc.
Coatings: Various paints, coatings, inks, insulating paints, resins, additives, organic solvents, etc.
Medicine: various ointments, extracts, lotion, pill pastes, syrups, health products, medicaments, etc.
Environmental protection: sewage, sludge, chemicals, suspensions, manure, fertilizer solutions, etc.
Chemical fiber: viscose Congee, amine fiber size, vinylon size, acrylic fiber size, polyester, polypropylene, man-made fiber, functional fiber, etc.
Company Profile
FAQ
| Q1: Are you a factory or a trading company? |
| A: We are manufacturer. |
| Q2: What are your payment terms? |
| A: 30% T/T in advance, balance should be paid after receiving BL copy or LC at sight. |
| Q3: Can you do OEM? |
| A: Yes,we can. Any OEM are welcome! |
| Q4: How about the MOQ? |
| A: Usually, it is 50-100 PCS for each modelBut sample order is highly welcome. |
| Q5:How about the delivery time? |
| A: 15-30 days after receiving customersdeposit. |
| Q6: How long is your warranty? |
| A: 1 year. |
| Q7:What can we do in one-year warranty? |
| A: 1.Providing Spare parts; 2.Engineer is available to service |
For more details.pls send us your details need.
we will feedback ASAP.
Application field:
){kind=link}
){kind=link}