Shanghai Jush 3.2cc/R Servo Motor Polyurethane Gear Metering Pump

Product Description

 

Product Description

 The GWMP Series Gear Metering Pump basically comprises a front plate, a center plate, two wear plates and a rear plates, the pairs of gear, a pump shaft and a drive shaft which are guided in high-precision bearings. The port for inlet and outlet of the pumps are implemented on the rear plate.  However, these can also be accommodated in a customised adapter block which is bolted to the pump.

     To achieve the greatest precision, reproducibility and the best possible total efficiency, the clearances inside the pump are adapted depending on medium to be delivered, the differential pressure and the viscosity. With the use of suitable structural innovations this series can also be used to shear and friction sensitive media.  By individually adapting to the actual operating conditions and the structural design, high reproducible volumentric efficiencies can be achieved. Moreover, the GP gear dosing pump with it's special gear teeth supports low-pulsation dosing of various media.

     The specific series including glue metering pump, coating metering pump, spinning metering pump, auxiliary metering pump, hot melt metering pump and etc...It widely used in pharmaceutical filling, food filling, chemical dosing, paint and coating, PU dispensing machine, foaming equipment, epoxy resin, hot melt adhesive, polyurethane equipment and other industrial and chemical process and control.

1) Volume Principle: The gear metering pump is a volumetric principle. The liquid is sucked into the suction chamber through a group of engaged gears under the action of the pressure difference, and then the medium is discharged from the cavity as it rotates.

2) Precise Metering: The precision of the gear metering pump is very high, and the volume discharged per revolution is constant, so the flow rate of the metering pump can be obtained by adjusting the speed of the gear metering pump.

3) Quantitative Addition: The displacement of the gear metering pump per revolution is fixed. Therefore, by adjusting the rotational speed of the gear metering pump and then controlling the number of revolutions of the gear metering pump, quantitative addition can be performed with an accuracy of 0.3% to ensure the accuracy of its addition.

Product Parameters

Product Name	Gear Metering Pump
Material	Work Tool Steel
Applicable viscosity	100~500000cp
Minimum pressure	<0.5 MPa
Maximum pressure	0.4~30CC<8 MPa 30~350CC <25 MPa
Suitable speed	10-100rpm (different viscosity and temperature, different speed)
Applicable media	glue, foaming agent, polyurethane, and other adhesive fluids

Model	Displacement (CC/R)	Total Height	Base Height	Min Inlet Pressure	Max Outpet Pressure	Accuracy	Temperature
GWMP-0.15	0.15	83	28.1	<0.2Mpa	<30Mpa	+/-3%	200ºC
GWMP-0.3	0.3	85	30.2	<0.2Mpa	<30Mpa	+/-3%	200ºC
GWMP-0.6	0.6	85	32	<0.2Mpa	<30Mpa	+/-3%	200ºC
GWMP-1.2	1.2	90	34	<0.2Mpa	<30Mpa	+/-3%	200ºC
GWMP-2.4	2.4	100	42	<0.2Mpa	<30Mpa	+/-3%	200ºC
GWMP-3.6	3.6	105	50	<0.2Mpa	<30Mpa	+/-3%	200ºC
GWMP-6	6	130	41	<0.2Mpa	<30Mpa	+/-3%	200ºC
GWMP-9	9	135	46	<0.2Mpa	<30Mpa	+/-3%	200ºC
GWMP-12	12	140	51	<0.2Mpa	<30Mpa	+/-3%	200ºC
GWMP-15	15	145	56	<0.2Mpa	<30Mpa	+/-3%	200ºC
GWMP-20	20	150	64	<0.2Mpa	<30Mpa	+/-3%	200ºC
GWMP-30	30	165	80	<0.2Mpa	<30Mpa	+/-3%	200ºC
GWMP-40	40	90	215	<0.2Mpa	<30Mpa	+/-3%	200ºC
GWMP-50	50	97	215	<0.2Mpa	<30Mpa	+/-3%	200ºC
GWMP-60	60	104.5	230	<0.2Mpa	<30Mpa	+/-3%	200ºC
GWMP-75	75	112	230	<0.2Mpa	<30Mpa	+/-3%	200ºC
GWMP-80	80	Customized	Customized	<0.2Mpa	<30Mpa	+/-3%	200ºC
GWMP-125	125	Customized	Customized	<0.2Mpa	<30Mpa	+/-3%	200ºC

Product Show

 

 

 

Company Profile

FAQ

Q1: Are you a factory or a trading company?

A: We are manufacturer.

Q2: What are your payment terms?

A: 30% T/T in advance, balance should be paid after receiving BL copy or LC at sight.

Q3: Can you do OEM?

A: Yes,we can. Any OEM are welcome!

Q4: How about the MOQ?

 A: Usually, it is 50-100 PCS for each modelBut sample order is highly welcome.

Q5:How about the delivery time?

A: 15-30 days after receiving customersdeposit.

Q6: How long is your warranty?

A: 1 year.

Q7:What can we do in one-year warranty?

A: 1.Providing Spare parts; 2.Engineer is available to service